The European Commission has drafted industrial battery durability rules. The draft sets minimum performance values for rechargeable batteries above 2 kWh. Comments run until 4 December 2026. The Commission plans to adopt the act in December 2026.
What Happened
These delegated rules (rules the Commission adopts under powers given in the law) sit under the Batteries Regulation (EU) 2023/1542. They are dated 29 September 2026, and the Commission published them on 1 October 2026. They would apply to rechargeable industrial batteries above 2 kWh.
The minimum values would apply from the later of 18 August 2027 or 18 months after the act enters into force. However, the Commission missed its legal deadline of 18 February 2026. Now it plans to adopt the act in December 2026. The act would enter into force 20 days after publication.
The rules are not final. Under the draft, batteries fall into repetitive-use types (charged and discharged in regular cycles) and on-demand types (kept ready for occasional use). The Commission has also notified the draft to the World Trade Organization (WTO). Because it is a delegated act, the European Parliament and the Council can also review it.
What’s New
- Residential storage batteries without lead: capacity fade (loss of usable capacity) below 4%, over 3,000 cycles and round-trip efficiency (energy out compared with energy in) above 93%.
- Other non-lead repetitive batteries: fade below 10% and lifetime above 1,000 cycles.
- Lead-based repetitive batteries: fade below 15% and lifetime above 500 cycles.
- On-demand batteries: fade below 5% and lifetime above 10 years.
- Dual-use batteries follow the repetitive-use values.
Key Dates & Timeline
Who and What Is in Scope
Industries: Battery and energy storage · Heavy duty vehicles · Industrial equipment · Energy storage systems
Who is affected: Makers and importers of industrial batteries above 2 kWh, energy storage integrators and industrial equipment makers.
Products and standards in scope: Rechargeable industrial batteries above 2 kWh, including residential energy storage systems.
Requirements and restrictions: Batteries would have to meet minimum capacity fade, lifetime and round-trip efficiency values. Second-life, reused, repurposed and remanufactured batteries keep their own compliance routes.
What Companies Should Do
- First, check which of your products count as industrial batteries above 2 kWh.
- Then compare your test data with the draft values.
- Next, check whether your batteries count as repetitive or on-demand.
- Finally, send comments by 4 December through the EU Technical Barriers to Trade (TBT) Enquiry Point (grow-eu-tbt@ec.europa.eu).
The draft sets a legal minimum for how long industrial batteries must last. Time is short. So check your product range against the values now.
Related: EU Standardizes Carbon Footprint Calculation for Industrial Batteries
EUR-Lex — Batteries Regulation (EU) 2023/1542 — https://eur-lex.europa.eu/eli/reg/2023/1542/oj
European Commission — Batteries — https://environment.ec.europa.eu/topics/waste-and-recycling/batteries_en
Reach out to our regulation experts on chemical and product regulatory compliances
































