⚠ Compliance Alert · EU · POPs · PFAS

EU Adds Long-Chain PFCAs (C9–C21) to the POPs Regulation: Restrictions Apply from 16 December 2026

On 12 November 2026, the European Union published Regulation (EU) 2026/1972, amending Annex I of the Persistent Organic Pollutants (POPs) Regulation (EU) 2019/1021. It adds C9–C21 long-chain perfluorocarboxylic acids (PFCAs), their salts and PFCA-related compounds, extending EU controls on PFAS. Manufacture, placing on the market and use are prohibited, alone, in mixtures or in articles, from 16 December 2026, with trace limits and time-limited exemptions for fluoroplastics, PTFE micropowders, fire-fighting foams and semiconductors.

Why This Can’t Wait

Under the POPs Regulation, compliance is assessed down to impurity level. Long-chain PFCAs can be present as by-products in PTFE and other fluoropolymers used in seals, hoses, coatings, lubricants and electronics. The application date is only weeks away, and without supplier declarations you cannot show that your materials meet the limits.

Background: Why Long-Chain PFCAs Are Now POPs

The POPs Regulation (EU) 2019/1021 implements the Stockholm Convention on Persistent Organic Pollutants in EU law. It controls substances that persist in the environment, accumulate in living organisms and can travel long distances. Substances listed in Annex I are prohibited from manufacture, placing on the market and use, with only limited, specified exemptions.

Long-chain PFCAs are very persistent and have been detected widely in the environment and in human biomonitoring. Some were already restricted under REACH and have since been listed internationally under the Stockholm Convention. This amendment aligns the EU POPs Regulation with that listing.

Key Provisions

  • ✓Restriction: manufacture, placing on the market and use of C9–C21 PFCAs, their salts and related compounds is prohibited, alone, in mixtures or in articles.
  • ✓UTC limits: concentration limits for unintentional trace contaminants set the levels below which impurities are not caught by the prohibition.
  • ✓Exemptions and transition periods: specific, time-limited exemptions for fluoroplastics, PTFE micropowders, fire-fighting foams and semiconductors.

Unintentional Trace Contaminant (UTC) Limits

≤ 0.025 mg/kg

C9–C21 PFCAs and their salts (sum)

≤ 0.26 mg/kg

C9–C21 PFCA-related compounds (sum)

Below these levels, the presence of these substances as impurities is not caught by the prohibition.

Compliance Timeline — Mark These Dates

12 November 2026 · Published

Regulation (EU) 2026/1972 published in the Official Journal.

2 December 2026 · In force (enforceable)

The amendment enters into force on the 20th day after publication.

16 December 2026 · Date of application

Prohibition and UTC limits apply to manufacture, placing on the market and use.

3 August 2028 · Fire-fighting foam deadline

Exemption for installed Class B fire-fighting foam systems ends.

16 December 2030 · Fluoropolymer transition ends

Transitional limits for fluoroplastics, fluoroelastomers and PTFE micropowders end.

17 December 2030 · Stricter limit

The C9–C14 limit applies to total C9–C21 PFCAs in fluoroplastics, fluoroelastomers and PTFE micropowders.

31 December 2030 · Semiconductor spare parts

Exemption for C9–C14 PFCAs in semiconductors in certain spare parts ends.

Exemptions and Transition Periods

Application Limit / scope Valid until
Fluoroplastics & fluoroelastomers (perfluoroalkoxy groups) C9–C14 ≤ 0.1 mg/kg; C15–C21 ≤ 15 mg/kg 16 Dec 2030
PTFE micropowders (ionising radiation / thermal degradation) C9–C14 ≤ 1 mg/kg; C15–C21 ≤ 15 mg/kg 16 Dec 2030
Fluoroplastics, fluoroelastomers & PTFE micropowders (after transition) C9–C14 limit applies to total C9–C21 PFCAs From 17 Dec 2030
Fire-fighting foams (installed Class B systems) ≤ 1 mg/kg PFCAs and salts; ≤ 10 mg/kg related compounds 3 Aug 2028
Fire systems refilled with fluorine-free foam after cleaning ≤ 10 mg/kg total C9–C21 PFCAs, salts and related compounds No end date
Semiconductors in spare parts (C9–C14) Spare parts for finished electronic equipment placed on the market before 31 Dec 2023 31 Dec 2030
Semiconductors in spare parts (C15–C21) Where the substance was originally used in the part being replaced or repaired Per official text

Who Is Affected

Any company placing fluoropolymer or PTFE-containing products on the EU market, especially in the automotive, industrial and electronics sectors. Long-chain PFCAs are most likely to appear in:

  • ✓Seals, gaskets and O-rings
  • ✓Fuel and fluid hoses
  • ✓Surface coatings and treatments
  • ✓Lubricants and greases
  • ✓Electrical and electronic components

Automotive suppliers already reporting through IMDS should check that material data captures long-chain PFCA content. Fire protection system owners and semiconductor spare-part suppliers should track their specific exemption dates.

Companies placing such products on the EU market should verify that their materials meet the UTC limits and know when any exemption or transition period they rely on ends. Because compliance is assessed to impurity level, supplier transparency is essential.

💬 Our Compliance Team’s Take

“Because POPs compliance goes down to impurity level, a clean material spec is not enough. You need supplier declarations that state long-chain PFCA content against the UTC limits, and a tracker for every exemption you rely on. The 2030 deadline for fluoroplastics and PTFE will arrive faster than most redesign cycles.”

— APA Engineering Regulatory Compliance Desk

What Companies Should Do Now

  1. 1Identify all parts, materials and mixtures that contain fluoropolymers or PTFE.
  2. 2Ask suppliers for declarations confirming long-chain PFCA content against the UTC limits.
  3. 3Assess whether any exemptions or transitional periods apply and record their expiry dates.
  4. 4Update internal restricted substance lists and supplier specifications, alongside your REACH and RoHS checks.
  5. 5Plan alternative materials where an exemption is due to expire.

Key Questions Answered

What are long-chain PFCAs?

Long-chain perfluorocarboxylic acids (C9–C21) are PFAS substances that are very persistent, accumulate in living organisms and have been widely detected in the environment and in human biomonitoring.

Why were long-chain PFCAs added to the EU POPs Regulation?

They have been listed internationally under the Stockholm Convention, and the POPs Regulation implements that convention in EU law. The amendment aligns EU law with the listing; some of these substances were already restricted under REACH.

When do the new POPs restrictions apply?

The amendment enters into force on 2 December 2026 and applies from 16 December 2026. Some uses have exemptions or transition periods running to 2028 or 2030.

What are the UTC limits for long-chain PFCAs?

≤ 0.025 mg/kg (sum) for C9–C21 PFCAs and their salts, and ≤ 0.26 mg/kg (sum) for C9–C21 PFCA-related compounds. Below these levels, unintentional impurities are not caught by the prohibition.

Is PTFE affected by the POPs amendment?

Yes. Long-chain PFCAs can be present as impurities in PTFE and other fluoropolymers. Transitional limits apply until 16 December 2030; from 17 December 2030, the C9–C14 limit applies to total C9–C21 PFCAs.

🚨 Bottom Line

The POPs amendment broadens EU controls on long-chain PFAS and brings EU law in line with the Stockholm Convention. From 16 December 2026, these substances are controlled down to trace levels, and fluoropolymer and PTFE users get transition time only until 2030. Acting early on supplier declarations and material reviews will support continued access to the EU market. Use this update as the trigger to collect supplier declarations and review your PFAS compliance plan this quarter, and use substances of concern screening to flag affected parts quickly.

Reference:

Are your fluoropolymer parts ready for 16 December 2026?

Our 140+ compliance experts help manufacturers screen materials for PFAS and long-chain PFCAs, collect supplier declarations and track every exemption deadline.

✓ 150+ global customers   ✓ 140+ compliance experts   ✓ ISO 27001 & ISO 9001 certified   ✉ compliance@apaengineering.com


 

Reach out to our regulation experts on chemical and product regulatory compliances